295-SER-ERS

Cargadores Eléctricos Estacionarios

El cargador eléctrico estacionario 295-SER-ERS de Barko cuenta con una unidad de energía remota. La bomba y las válvulas hidráulicas con detección de carga de la máquina ayudan a igualar la presión y el flujo, y un tanque hidráulico de 568 L (150 galones) permite intervalos de operación prolongados.

Ver Ficha Técnica

Formulario de Cotización

Características / Especificaciones / Accesorios

Características

Power Sources

The 295-SER-ERS is available with a 100-HP (75 kW) open drip proof encapsulated electric motor, electrical enclosure with motor start circuit, and start/stop switches supplied for the control console.

Pedestal

Loader is mounted a standard 33-inch-tall (838 mm) pedestal with 39-inch (991 mm) diameter bottom plate.

Load Sensing Hydraulics

Load sensing valves and pump deliver excellent metering by matching pressure and flow. Efficient and precise grapple functions reduce operator fatigue.

Joystick Controls

Ergonomically designed, multi-functional, dual electric-controlled joysticks are supplied for mounting into the operator station.

Boom Construction

Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.

Swing Torque

Dual motors and planetary gearboxes produce 30,000 foot-pounds (40,674 Nm) of swing torque.

Zinc Plated Pins

Extra large zinc plated pins and bolts provide added durability in high-stress areas.

Centralized Valves

Centralized hydraulic control valves are easily accessible.

Bolt-On Cylinder Glands

Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.

Especificaciones Técnicas

DIMENSIONS –

Overall Height	6′ 3″ (191 cm)
Overall Length	32′ 3″ (983 cm) with 30′ boom extended
Overall Width	3′ 3.5″ (100 cm)
Total Operating Weight	18,000 lbs (8,165 kg) without attachment

PEDESTAL –

Height	33″ (838 mm)
Top Plate	35.5″ (902 mm) diameter
Bottom Plate	39″ (991 mm) diameter
Bottom Holes	(30) 1-3/8″ (35 mm) diameter holes equally spaced on a 34.5″ (876 mm) diameter circle

AVAILABLE POWER SOURCES –

Electric Motor	100 HP (75 kW) drip proof encapsulated motor, 3-phase, 460-volts, 60 Hz, operating at 1,800 RPM
Electric Collector	4-pass, 300 amp capacity, located in pedestal base; continuous rotation only
Electrical Package	NEMA 4 enclosure with motor start circuit, 3-phase power monitor and circuit breaker
Start/Stop	Key start switch and emergency stop switch mounted on control console

HYDRAULICS –

Tank	150 gal. (568 L) with return line filter, shut-off valve on pump suction line
Pump	70 GPM (265 LPM), variable displacement piston
Operating Pressure	3,000 psi (206 bar) main system
Features	Heavy-wall tubing and multi-wire braided hose; quick disconnect diagnostic ports, accumulator for main boom cushioning; rotary manifold for continuous rotation

BOOM –

Structure	All-welded construction with fabricated box type design; aluminum bronze bushings with grease grooves at boom pivot points
Horizontal Reach	30′ (914 cm)
Vertical Reach	36′ 9″ (1,120 cm) with 33″ (84 cm) pedestal
Maximum Lift Capacity	22,820 lbs (10,351 kg)
Cylinder Features	Hydraulic cylinders with wear rings on pistons and bolt-on glands; heavy-duty steel tubing; induction hardened rods with heavy chrome plating; spherical bearings at all pivots
Main Boom Cylinder	6″ x 51″ (152 x 1,295 mm) with 3.5″ (89 mm) rod
Stick Boom Cylinder	6″ x 35″ (152 x 889 mm) with 3.5″ (89 mm) rod
Maximum Lift Capacity (30′ Boom)	19,960 lbs (9,054 kg) with 10′ (3.0 m) radius 17,390 lbs (7,888 kg) with 15′ (4.6 m) radius 12,920 lbs (5,860 kg) with 20′ (6.1 m) radius 10,240 lbs (4,645 kg) with 25′ (7.6 m) radius 5,420 lbs (2,458 kg) with 30′ (9.1 m) radius

SWING SYSTEM –

Rotation/Swing Speed	Continuous on 39″ (991 mm) internal tooth turntable bearing; 8 RPM, power transmitted though dual Geroler motors and planetary gearboxes
Swing Torque	30,000 ft-lbf (40,674 Nm); 100% theoretical
Braking	Hydrostatic dynamic braking with 40,000 ft-lbf (54,232 Nm) braking swing torque

Accesorios / Opcionales

Attachments

Log & pulp grapples
Grapple saw

Boom

30-foot (914 cm) live heel boom

360-Degree Rotation

Optional hydraulic rotary manifold allows for 360-degree continuous boom rotation.

Accessories

380 or 575-volt electric system
Hydraulic reservoir heater (3 kW)
Automatic grease system
Boom lights (12V DC)
Detachable heel bar (standard/offset, single/double vee)
Rotation stops (310-degree maximum)