595-SER-ERS

Cargadores Eléctricos Estacionarios

Entre los cargadores más potentes y eficientes de la línea Barko, el 595-SER-ERS ofrece una capacidad máxima de elevación de 38,820 libras. Con una unidad de potencia remota, el cargador está diseñado para una eficiencia óptima para entregar más cargas por día.

Ver Ficha Técnica

Formulario de Cotización

Características / Especificaciones / Accesorios

Características

Power Sources

The 595-SER-ERS is available with a 125-HP (93 kW) open drip proof encapsulated electric motor, electrical enclosure with motor start circuit, and start/stop switches supplied for the control console.

Pedestal

Loader is mounted a standard 33-inch-tall (838 mm) pedestal with 52-inch (1,321 mm) diameter bottom plate.

Load Sensing Hydraulics

Load sensing valves and pump deliver excellent metering by matching pressure and flow. Efficient and precise grapple functions reduce operator fatigue.

Joystick Controls

Ergonomically designed, multi-functional, dual electric-controlled joysticks are supplied for mounting into the operator station.

Boom Construction

Wider, all-welded boom construction with fabricated box type design includes engineered sweeping curves for added strength and increased fatigue resistance.

Swing Torque

Dual motors and planetary gearboxes produce 55,000 foot-pounds (74,570 Nm) of swing torque.

Zinc Plated Pins

Extra large zinc plated pins and bolts provide added durability in high-stress areas.

Centralized Valves

Centralized hydraulic control valves are easily accessible.

Bolt-On Cylinder Glands

Bolt-on cylinder glands make on-site service easy, while piston rings extend product life. Cylinders are made of heavy-duty steel tubing, and heavy chrome cylinder rods are heat-treated for added strength.

Especificaciones Técnicas

DIMENSIONS –

Overall Height	6′ 3″ (191 cm)
Overall Length	34′ 7″ (1,054 cm) with 32′ boom extended
Overall Width	4′ 6″ (137 cm)
Total Operating Weight	21,500 lbs (9,752 kg) without attachment

PEDESTAL –

Height	33″ (838 mm)
Top Plate	49″ (1,245 mm) diameter
Bottom Plate	52″ (1,321 mm) diameter
Bottom Holes	(36) 1-3/8″ (35 mm) diameter holes equally spaced on a 46″ (1,168 mm) diameter circle

AVAILABLE POWER SOURCES –

Electric Motor	125 HP (93 kW) drip proof encapsulated motor, 3-phase, 460-volts, 60 Hz, operating at 1,800 RPM
Electric Collector	4-pass, 300 amp capacity, located in pedestal base; continuous rotation only
Electrical Package	NEMA 4 enclosure with motor start circuit, 3-phase power monitor and circuit breaker
Start/Stop	Key start switch and emergency stop switch mounted on control console

HYDRAULICS –

Tank	150 gal. (568 L) with return line filter, shut-off valve on pump suction line
Pump	90 GPM (341 LPM), variable displacement piston
Operating Pressure	3,600 psi (248 bar) main system
Features	Heavy-wall tubing and multi-wire braided hose; quick disconnect diagnostic ports, accumulator for main boom cushioning; rotary manifold for continuous rotation

BOOM –

Structure	All-welded construction with fabricated box type design; aluminum bronze bushings with grease grooves at boom pivot points
Horizontal Reach	32′ (975 cm)
Vertical Reach	37′ 7″ (1,145 cm) with 33″ (84 cm) pedestal
Maximum Lift Capacity	38,820 lbs (17,608 kg)
Cylinder Features	Hydraulic cylinders with wear rings on pistons and bolt-on glands; heavy-duty steel tubing; induction hardened rods with heavy chrome plating; spherical bearings at all pivots
Main Boom Cylinder	7″ x 51″ (178 x 1,295 mm) with 4″ (102 mm) rod
Stick Boom Cylinder	7″ x 35″ (178 x 889 mm) with 4″ (102 mm) rod
Maximum Lift Capacity (32′ Boom)	38,820 lbs (17,608 kg) with 12′ (3.7 m) radius 30,290 lbs (13,739 kg) with 15′ (4.6 m) radius 22,550 lbs (10,229 kg) with 20′ (6.1 m) radius 17,950 lbs (8,142 kg) with 25′ (7.6 m) radius 12,810 lbs (5,811 kg) with 30′ (9.1 m) radius 7,770 lbs (3,524 kg) with 32′ (9.8 m) radius

SWING SYSTEM –

Rotation/Swing Speed	Continuous on 54″ (1,372 mm) internal tooth turntable bearing; 7.5 RPM, power transmitted though dual piston motors and planetary gearboxes
Swing Torque	55,000 ft-lbf (74,570 Nm); 100% theoretical
Braking	Hydrostatic dynamic braking with 73,000 ft-lbf (98,975 Nm) braking swing torque

Accesorios / Opcionales

Attachments

Log & pulp grapples
Grapple saw

Booms

32- or 36-foot (975 or 1,097 cm) live heel boom
32-, 36- or 40-foot (975, 1,097 or 1,219 cm) straight boom
36-foot (1,097 cm) coil handler boom

360-Degree Rotation

Optional hydraulic rotary manifold allows for 360-degree continuous boom rotation.

Accessories

380 or 575-volt electric system
Hydraulic reservoir heater (3 kW)
Automatic grease system
Boom lights (12V DC)
Detachable heel bar (standard/offset, single/double vee)
Rotation stops (310-degree maximum)